MODEL VG06080
17
2. Remove the threshold. Apply silicone to the
underside of the threshold. Place the
threshold back into its shower base location.
Align the threshold and press firmly down.
Apply silicone to the threshold around the
inside and outside of the shower base.
Remove any excess silicone from the
threshold.
3. Place the threshold end clip (#12) over the
end of the threshold (#13). Mark the
location for the screw hole. Remove the
threshold end clip and drill a hole where
you've marked and place a plastic anchor
(#16) inside it.
Preferred method of
installation negates anchors and has the
installation going right into studs.
E2
13
9
E3
13
12
!
16
16
