VIGO EHR 5016K, Руководство пользователя

Страница: 25 / 116

23
EN
2. INSTALLATION INSTRUCTIONS
2.1 Standard Model
1. Open the packing box and take out the radiator with its
protective nylon cover. Tear the protective nylon cover outside
the box without giving any harm to the appliance and take out
the assembly unit.
2. Correct space has to be measured in order that the
connection cord can easily be connected to the electric socket.
After determination of the installation area, the holes must be
marked according to the method shown in Figure 4.
3. After marking the points according to Figure 4, the holes will
be drilled by a 010 mm drill and the plastic dowels (see figure
3-part “A”) that are in the installation items are inserted to these
holes.
4. Attach the anchors(4 pieces) (see figure 3 - part”B”) onto
plastic dowels with the washer (see figure 3 -part “C ) and the
screw (see figure 3 - part “D”)
5. Insert the plastic parts (see figure 3 - part “E”) into the
lower installation bracket (see figure 3 - part “G”) and fix the
installation brackets (see figure 3 - part “F-G”)on the tubes with
the screw (see figure 3 - part “H”).
6. Attach the installation brackets(4 pieces) on the towel
warmer and fix the towel warmer on the wail by screwing (see
figure 3 - part “I”) the installation brackets onto anchors (see
figure 3 - part “B”) on the wall.
Note: Protect the control unit against impacts and crashes
during installation.
6x150 mm