1.1.1
CPU and chassis fan connectors (2-pin CPU_FAN, 4-pin CHA_FAN).
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
NOTE: Do not forget to connect the fan cables to the fan connectors. Insufficient air flow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors! The CPU_FAN connector supports a
CPU fan of maximum 1A (12 W) fan power.
1.1.2
ATX power connectors (2-pin EATXPWR)
Correctly orient the ATX power supply plugs into these connectors and push down firmly
until the connectors completely fit.
1.1.3
Intel® LGA1151 CPU socket
Install Intel® LGA1151 CPU into this surface mount LGA1151 socket, which is designed
for 6th Generation Inte
l® Core™ i7 / i5 / i3, Pentium®, and Celeron® processors.
1.1.4
DDR4 DIMM slots
Install 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR4 DIMMs into these SODIMM
sockets.
1.1.5 Speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
1.1.6
System panel connector (10-1 pin PANEL)
This connector supports several chassis-mounted functions.
