manualshive.com logo in svg

Viglen Vig700S, Руководство пользователя, Страница: 69 / 84

Поделиться
Скачать
Viglen Vig700S Скачать руководство пользователя страница 69

V1.0                                   Vig820S Motherboard Manual 

68 

4.10.1 Fast Boot [Enabled] 

 
[Enabled]  

 

Select to accelerate the boot speed. 

[Disabled]  

 

Select to go back to normal boot. 

 

The following five items appear when you set 

Fast Boot 

to [Enabled]. 

 

SATA Support [All Devices] 

[All Devices]  

All devices connected to SATA ports will be available during POST. This 
process will extend the POST time. 

 
[Hard Drive Only]  

Only hard drives connected to SATA ports will be detected during POST. 
Any hardware change will disable fast boot. 

[Boot Drive Only]  

Only boot drive connected to SATA ports will be detected during POST. 
Any hardware change will disable fast boot. 

 

USB Support [Partial In...] 

[Disabled]  

 

All USB devices will not be available until OS boot up for a fastest POST time. 

[Full Initialization]  

All USB devices will be available during POST. This process will extend the POST 
time. 

[Partial Initialization]  

For a faster POST time, only the USB ports with keyboard and mouse connections 
will be detected. 

 
PS/2 Keyboard and Mouse Support [Auto] 

Select any of these settings when PS/2 keyboard and mouse are installed. These settings only apply when 
Fast Boot is enabled. 
 
[Auto]  

For a faster POST time, PS/2 devices will only be available when the system 
boots up or rebooted when the PS/2 devices have not been reconnected or 
changed. If you disconnect or change PS/2 devices before restarting the system, 
PS/2 devices will not be available and BIOS setup program will not be accessible 
via PS/2 devices. 

[Full Initialization]  

For full system control, PS/2 devices will be available during POST at any 
circumstances. This process will extend POST time. 

[Disabled]  

For the fastest POST time, all PS/2 devices will not be available until your 
computer enters the operating system. 

 
Network Stack Driver Support [Disabled] 

 
[Disabled] 

 

 Select to skip the network stack driver from loading during POST. 

[Enabled]  

 

Select to load the network stack driver during POST. 

 
Next Boot after AC Power Loss [Normal Boot] 

 
[Normal Boot]    

Returns to normal boot on the next boot after AC power loss. 

[Fast Boot]  

 

Accelerates the boot speed on the next boot after AC power loss. 

 

 

4.10.2 Boot Logo Display [Auto] 

 
[Auto]    

 

Adjust automatically for Windows® requirement. 

[Full Screen]  

 

Maximize the boot logo size. 

[Disabled]  

 

Hide the logo during POST. 

 
POST Delay Time [3 sec] 

This item appears only when you set 

Boot Logo Display 

to [Auto] or [Full Screen]. This item allows you to 

select the desired additional POST waiting time to easily enter the BIOS setup. You can only execute the 
POST delay time during Normal Boot. The values range from 0 to 10 seconds. 
 

Post Report [5 sec] 

This item appears only when you set 

Boot Logo Display 

to [Disabled]. This item allows you to select a 

desired post report waiting time. Configuration options: [1 sec] ~ [10 sec] [Until Press ESC]. 

Содержание Vig700S





















































































Отзывы:

Нет отзывов