Viglen Vig700S Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 84

Viglen Vig700S Скачать руководство пользователя страница 66

V1.0 Vig820S Motherboard Manual

65

4.9.1 CPU Temperature [xxxºC/xxxºF]

The onboard hardware monitor automatically detects and displays the CPU temperature.
Select

Ignore

if you do not wish to display the detected temperature.

4.9.2 CPU / Chassis Fan Speed [xxxx RPM] or [Ignore] / [N/A]

The onboard hardware monitor automatically detects and displays the CPU / chassis fan
speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A.
Select Ignore if you do not wish to display the detected speed.

4.9.3 CPU Input Voltage (VCCIN), 3.3V Voltage, 5V Voltage,12V Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard voltage
regulators. Select ignore if you do not want to detect this item.

4.9.4 CPU Q-Fan Control [Enabled]

[Disabled]

Disables the CPU Q-Fan control feature.

[Enabled]

Enables the CPU Q-Fan control feature.

CPU Fan Speed Low Limit [200 RPM]

This item appears only when you enable the CPU Q-Fan Control feature and allows you to disable or set
the CPU fan warning speed. Configuration options: [Ignore] [100RPM] [200RPM] [300 RPM] [400 RPM]
[500 RPM]

CPU Fan Profile [Standard]

This item appears only when you enable the CPU Q-Fan Control feature and allows you to set the
appropriate performance level of the CPU fan.

[Standard]

Sets to [Standard] to make the CPU fan automatically adjust depending on the CPU
temperature.

[Silent]

Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.

[Turbo]

Sets to [Turbo] to achieve maximum CPU fan speed.

[Manual]

Sets to [Manual] to assign detailed fan speed control parameters.

The following four items appear only when you set CPU Fan Profile to [Manual].

CPU Upper Temperature [70]

Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range from
20ºC to 75ºC.

CPU Fan Max. Duty Cycle(%) [100]

Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from 20%
to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at the
maximum duty cycle.

CPU Lower Temperature [20]

Displays the lower limit of the CPU temperature.

CPU Fan Min. Duty Cycle(%) [20]

Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values range from 20%
to 100%. When the CPU temperature is under the lower limit, the CPU fan will operate at the
minimum duty cycle.

«
...
64
65
66
67
68
...
»

Содержание Vig700S





















































































Отзывы:

Нет отзывов