Viglen VIG615M Скачать руководство пользователя страница 15

Страница: 15 / 75

V1.0

VIG615M Motherboard Manual

Table 2:

Motherboard Connection

Rear System Fan

SPI Debugging Connector

ATX 12V Power Connector

USB headers

LGA 775 CPU Socket

S/PDIF-Out Connector

CPU Fan Connector

Floppy Disk Drive Connector

Front System Fan

Front Panel Audio Connector

Memory DIMM Slots

CD-In Connector

ATX 24-Pin Power Connector

PCI Slot 32-bit

IDE Connector

PCI Express x1 and x16 Slot

Clear CMOS Jumper

Chassis Intrusion Connector

Front Panel Connector 1
(Speaker, Power LED)

Serial Port Connector

Front Panel Connector 2 (Reset
Switch, HDDLED, Power LED,
Power Switch)

Rear I/O Connectors

Serial ATA Connectors

Overview of System Board Components

A – System Fan1

This is used to keep the Motherboard components and other components cool.

B – ATX 12V Power Connector

This 12V power connector is used to provide power to the CPU

C – LGA775 pin CPU socket

CPU sits in the LGA775 pin socket.

D – CPU Fan Header

Fan header dedicated purely for the Heatsink to cool the CPU.

E – Front System Fan header

This is used to keep the Motherboard components and other components cool.

F – 2 x DIMM Slots

Insert Memory modules DDR2 667/800 MHz.

G – ATX 24 pin Power Connector

This is the main power connector for the motherboard.

H – IDE Connector

This can be used to connect an IDE Hard Disk Drive or even a CD-ROM drive.

I – Clear CMOS jumper

This allows you to clear the CMOS of the Motherboard when moving the jumper from
pins 1-2 to 2-3.

J – Front Panel Connector 1

Controls the Hard Disk Drive LED, Power Switch, Reset Switch and Power LED

Содержание VIG615M












































































Результаты поиска

Содержание VIG615M

Отзывы:

Похожие инструкции для VIG615M

Бренды по названию

Популярные бренды

Viglen VIG615M, Руководство пользователя

Результаты поиска

Содержание VIG615M

Отзывы:

Похожие инструкции для VIG615M

Бренды по названию

Популярные бренды