Viglen Vig430p, Руководство пользователя

Страница: 23 / 103

Vig430P Motherboard Manual
22
Table 4: GLAN Jumper
Function/Mode Jumper Setting Configuration
(Default)
Enable
1-2
Enables onboard LAN controller, this may also be
controlled via additional BIOS setting.
Disable 2-3
Disables onboard LAN controller. If set to disabled
this may not be enabled via additional BIOS
setting.
Watch Dog Enable/Disable Jumper (JWD)
JWD controls the Watch Dog function. Watch Dog is a system monitor that can reboot the
system when a software application is “hung up”. The table below describes the jumper settings.
Table 5: Watch Dog Jumper
Function/Mode Jumper Setting Configuration
(Default)
Reset
1-2
This will cause WD to reset the system if an
application is hung up.
NMI 2-3
This will generate a non-maskable interrupt signal
for the application that is hung up
Disable Open This disables the Watch Dog feature
I
2
C Bus to PCI Slots Jumper (JI
2
C1/JI
2
C2)
Jumpers JI
2
C1/JI
2
C2 allows you to connect the System Management Bus (I
2
C) to PCI slots. The
table below describes the jumper settings.
Table 6: I
2
C Bus to PCI slots Jumper
Function/Mode Jumper Setting Configuration
Enables Closed
This enables the System Management Bus (I
2
C)
to PCI slots connection.
(Default)
Disable
Open
This disables the System Management Bus (I
2
C)
to PCI slots connection.