WARNING! - To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture. This apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases shall be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must be connected to a
mains socket outlet thru an AC to DC Power supply.
WARNING! - The mains plug is used as the disconnect device and shall remain readily
operable.
Application Drawing
Vi30005W 5-Port, 1G, IP67 PoE Powered PoE Switch Switch Installation Manual
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IP Camera-end Installation
The Smart Choice for Transmission Solutions
www.vigitron.com
Important Safety Warning
PoE Switch/PoE Midspan end Installation
- Read and keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should conform to all local
codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage wiring.
- To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture,
dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron equipment.
- DO NOT install the unit in a place where the operating ambient temperature exceeds 75°C or
is below - 40°C.
- Make sure that the external power supply output voltage is in the recommended range.
- Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at power source,
convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as when a power supply cord or plug is damaged, liquid
has been spilled, objects have fallen inside the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
- The main plug is used as the disconnect device and shall remain readily operable.
UTP Uplink w/ Remote PoE:
- Connect the network cable coming from a 60W PoE midspan to the uplink
Ethernet port at rear of Vi30005W.
- Plug in the IP/PoE devices to the four ports one the Vi30005W's front panel.
PoE Power is allocated based on the required port power up to 37W starting with
Port 1 having the highest priority. Once the total sum of the PoE power is allocated
no more power will be available to remaining ports.
UTP Uplink w/ Local Power Supply:
- Connect the network cable coming from the PoE switch or PoE midspan
to the uplink Ethernet port at rear of Vi30005W.
- Plug in the IP/PoE devices to the four ports one the Vi30005W's front panel.
- Connect the Vi1120 power supply to the Vi30005W power connector.
Individual ports will be able to provide up to 37W.
UTP link:
- Connect the network cable coming from the Vi30005W Uplink port to one of the
Ethernet ports of the PoE switch or PoE Midspan.
Vi300005W_UM
Vigitron’s MaxiiNet™ Vi30005W is a hardened fixed managed 5-port 1000Mbps PoE
switch with IP67 construction that can operate at-40°C to 75°C.
The Vi30005W can be powered by Uplink PoE sources up to 74W or locally by the
Vi1120 to provide 802.3at PoE up to 37W to each port. The Vi30005W’s
plug-and-play eliminates the need for IP addressing. The four Ethernet port can be
directly connected to any IP address and will pass that device's IP address. Network
pre-programmed switching features include 802.1p QoS priority queuing, port based
VLAN, MAC addressing up to 2K full and half duplex operation compliant to 802.3x
standards and automatic address learning and aging.
The Vi30005W takes full advantage of high bandwidth maintaining 10/100/1000Mbps
transmission with minimum transmission error and latency by employing full layer 2
network switching technology. The Vi30005W can be used to connect to multiple
remote network devices such as Megapixel IP cameras, VoIP telephone systems, or
wireless transmitters.
In addition to a 1G uplink its Fiber uplink port can accept any MSA compliant fiber
SFPs to transmit four cameras over distance up to 80Km.
Max
ii
Net
TM
Cat 5/6
SFP
PoE Camera
The Vi30005W is a PoE powered switch that can be used to power up to four cameras using PoE.
The Vi30005W can be used to power up to four PoE cameras using a local power supply.
Powering the Vi30005W and 4 remote PoE cameras using PoE
Powering the Vi30005W and 4 remote PoE cameras using local power supplies
Vi30210
56VDC
Vi10240
Data +
72W PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Data
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Non-PoE Switch
Vi30005W
PoE Camera
Data +
PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Vi30005W
Vi10120
