RFID AREA
LED indicator
Appearance
Battery Cover
Power Switch
Tamper Detector
Battery
Reset Hole
DC-IN
3
ARM
DISARM
HOME ARM
Usage
Activate Panel
1.
When the keypad is in sleep mode, touching any button will activate the keypad.
2.
After being activated, the keypad will synchroni
s
e the real-time status with the alarm system
immediately, the result will be represented by the status bar.
3.
When there is no operation on the keypad
for 10 seconds
, it will enter sleep mode .
4.
When the keypad is sleeping, it will not react to any signal sent from the system until the next
activation.
Why sleep
mode
?
When the keypad is in battery mode, sleep mode is the best option for long-term use.
When the power adapter is connected, it starts providing power and charging the battery. With the
help of
an
over-charging protective circuit, we recommend users to keep the adapter connected
while using.
If you
are not using
the
power
adapter,
the keypad has
a
Low battery indicator
that
will light up once
every
15 seconds and
a
push notification will be sent to the APP. Please
charge in time.
Arm/Disarm/Home Arm
Input the operation code, and press
[Arm] [Disarm]
or
[Home Arm]
key.
The status bar will flash once and then change colour, as follows,
after the command is executed correctly.
[Arm]
: Red
[Disarm]
: Green
[Home Arm]
: Blue
Note: The operation code can be set in the App
.
Read the RFID tag on the keypad panel, the system will Disarm
immediately if the tag
has been paired.
Once the system is in SOS status and the keypad is activated, the
status
bar will flash red and generate beep alarm sounds for 1
minute.
SOS
6
