_________________________________________________________________________________________
Vigilant Inc. | 85 Industrial Park Drive | Dover, NH 03820 | (888) 812-4427 | vigilantinc.com
Page: 9
Setting-up Your Humidification System
1. Pull open the wood panel. Locate the black plastic water reservoir positioned in the center of the opening.
Remove all packing materials from around the reservoir.
2. Carefully fill the reservoir with 1.5 quarts of distilled water. USE ONLY DISTILLED WATER. DO NOT FILL PAST
THE MAX FILL LINE.
3. Treat the water with Baceteriostat to keep the reservoir clear of bacteria.
4. Check to make sure that the white mesh wicking filters are positioned vertically in the slots in the reservoir.
They should protrude about an inch above the top edge of the reservoir.
5. The humidor is ready for operation, simply plug the unit into a grounded outlet. The control panel will run
through its stabilization mode and the fans will begin to operate after 10 minutes. You will see one digital
readout of the humidity. Initial readings are meaningless as the cabinet has not been operating since it
left the Vigilant testing facility.
Reservoir Connection
Reservoir
Fan
Thread clockwise
to connect to
reservoir cable
Fill the reservoir with 1.5 quarts of distilled water.
Treat the water with Bacteriostat if desired.
Do NOT fill beyond Max FILL tab
