_________________________________________________________________________________________
Vigilant Inc. | 85 Industrial Park Drive | Dover, NH 03820 | (888) 812-4427 | vigilantinc.com
Page: 3
Parts Supplied
• Humidification Reservoir
• Humidification Wicking Filter
• (4) Spanish Cedar shelves with clear fronts
• Keys (2)
• Accessories Order Form
• (2) Z-clips
• (4) Toggle wall anchors (comes with screws)
Tools & Materials Needed
• Drill/drill bits
• Tape measure
• Screw driver
• Stud finder
• Level
• #8 Screws (used if stud present)
• Wire cover (optional)
Save all packing materials and sales receipt. Vigilant products should only be returned in their original packaging.
IMPORTANT!
DO NOT PLUG IN YOUR VIGILANT ELECTRONIC CIGAR CABINET UNTIL ALL PACKING MATERIALS HAVE BEEN
REMOVED AND YOU HAVE CAREFULLY READ THESE INSTRUCTIONS.
Unpacking Your Cigar Cabinet
1. When your humidor arrives, it is important to inspect the shipment for any visible damage. We take great
pride when packaging our products, however, shipping damage that’s out of our control can happen.
ANY ITEMS THAT APPEAR DAMAGED SHOULD BE
REPORTED TO VIGILANT WITHIN 7 DAYS OF DELIVERY OR THE
DAMAGE CLAIM CANNOT BE HONORED
To report any damage, please contact us at (888) 812-4427
2. Find a suitable location for your Wall Humidor away from temperature extremes within a room. While the
cabinet will easily control the interior climate in a wide range of exterior conditions, it is recommended that
the cabinet not be placed directly in front of radiators, heating elements, or air conditioner ducts. The tem-
perature and humidity extremes surrounding these ducts can cause short cycling of the system.
3. As with any piece of fine furniture, please keep your cabinet out of direct ultra-violet light, as this may alter
the finish over time. This is especially critical for this piece because of the clear varnish finish and the combi-
nation of wood species used in its construction.
4. Remove all packing material from reservoir area in the bottom, left of the cabinet interior. Also, check to see
that the white mesh wicking filters are sitting upright in the water reservoir area.
5. Before you plug the cabinet into a surge protector, partially open the door, leaving the cabinet at room tem-
perature for approximately one hour. This allows the interior of the cabinet to acclimate to your room envi-
ronment prior to operation.
