Vigilant HumiDoor 75, Руководство пользователя

Страница: 11 / 16

Vigilant Inc. Reliance End Table Owner’s Manual, Page 4
OPERATING YOUR DESKTOP CABINET
1.
Locate the wall-adapting power supply and connect it to the power inlet
cord on the rear or bottom of cabinet. Plug the power supply into an
approved outlet. It is recommended to use a surge protector or a GFI outlet
to plug your unit into to avoid damage that could occur during an electrical
storm or power surge. Never move your cabinet when you have water in
the water tray. Doing so will cause the electronics to short out when water
spills in the cabinet.
! IMPORTANT. Once connected to power, the Guardian control will begin
a 10-minute stabilization program. Ignore any alarms and continue with
the follow steps.
2.
Lift the wood door panel to remove the Reservoir.
3.
Fill the water reservoir through the rectangular opening in the top of the
reservoir to the MAX FILL line. You can fit about 8.5oz of water in the
reservoir. Be sure not to overfill the water tray as the electronics will short
out if put in contact with water. We recommend using only distilled water.
Never pour water on your fan or electronics. Close the wood door once the
reservoir is filled and connected.
4.
Your cabinet is now ready for operation. Please read further for control
operation.