7
Fi
nished Archtop
9.
Carefully
stand
your
arch
top
upright
and
check
that
your
assembly
has
four
90
degree
angles.
You
should have the same measurement if you measure diagonally from corner to corner. If
necessary,
use a soft-faced hammer to achieve an equal measurement for each diagonal.
10.
Your archtop is now complete and ready to be moved to its final location. Be sure to securely
attach the arch to the assembly below it. We recommend that you pre-drill and screw from the rack/
table side and into the bottom panel of your arch. Attach in all four corners, being sure to use wood
screws that are long enough to screw into the arch's bottom panel but not so long as to go
through the
panel's top surface.
11.
Check to make sure that your assembly is level, front to back and side to side. Shim if
necessary.
Attach the assembly to any adjacent racks and at any accessible wall stud locations using
the
appropriate length wood screws (not provided).
** Failure to attach the arch to the wall could result in the arch tipping over.