Step 7 - Connecting the
Driver
Connect the
driver
to the assembly and install the switch if desired.
Step 8 - Lighting Kit Check
Plug the
driver
into the power source and check that all fixtures properly illuminate. Change bulbs out if
necessary.
Step 9 - Re-attaching Slats
Attach the conversion slats to the arch top in the original locations using the supplied screws.
Diagram 7
Radius Arch Slat &
Escape Hole Locations
ESCAPE HOLE FOR WIRE PATH
Diagram 6
Soffit Arch Slat &
Escape Hole Locations
ESCAPE HOLE FOR WIRE PATH
You may want to pre-drill the arch top for easier installation.
9