TSFC 24-2/4 User Manual
Vighnaharta Technologies Pvt. Ltd. Page
21
of
26
3.
Disabled:
This mode is used to disable the zone. The system does not scan the input signal from smoke
detectors, heat detectors, etc.
3.3 NAC
After entering in the
NAC
configuration
menu, LCD will show below screen,
Use
LEFT
and
RIGHT
keys to
ENABLE/DISABLE
NAC output. After changing the mode,
press
ENTER
key to save the changes.
3.4 NAC Auto Silence
NAC auto silence feature is use for SILENCE siren automatically after completing pre define time. If NAC auto
silence feature is set as a DISABLE at that time SIREN will not OFF till panel RESET.
Use
LEFT
and
RIGHT
keys to
ENABLE/DISABLE
NAC output. After changing the mode,
press
ENTER
key to save the changes. By default it has set as a ENABLE mode.
By default NAC Silence time
set as a 10 minutes
and is not user editable.
3.5 Auto Key Lock
This function is use to LOCK panel keypad automatically after completion of Auto Key Lock timer. If this
menu is set as a DISABLE keypad auto lock timer will not work as well as panel keypad not lock. By default
it is set as a DISABLE.
Use
LEFT
and
RIGHT
keys to
ENABLE/DISABLE
Auto Key Lock function. After changing the
mode, press
ENTER
key to save the changes.
Auto key lock timer is set as 3 minutes and is not user
editable.
3.6 Password Change
This function is use to SET keypad password. Without entering password user cannot enter the MENU
function. By default it is set as a “1111”.
NAC
< ENABLE >
NAC Auto Silence
< ENABLE >
Auto Key Lock
< DISABLE >
PASSWORD
CHANGE
