TS 21 I-HC User Manual
Vighnaharta Technologies Pvt. Ltd
Page
4
of
19
Technical Specifications
Power Supply
Input- 24 VDC, 200mA
Input
4 Magnetic keys
Indication
LED indication for following status:
1. Power ON: green LED
2. Low Alarm: orange LED
3. High Alarm: red LED
Output
Two potential free relay output with NO / NC
Selectable 0-5V OR 0-10V analog output
4 -20mA current output
Dimensions
(120x120x100) mm (L x W x H)
Operating Temperature
-10C°to 55C°
Humidity
0 to 95 % Rh.
RS485 Interface
Modbus RTU Protocol
Enclosure
Aluminium casting
Installation Procedure
Prerequisites:
The convenient location for mounting the system must be finalized.
•
TS 21 I-HC unit
•
Power supply adapter ( Optional)
•
mounting screws
•
User manual
•
Magnetic stylus
•
Align Key
•
Screw Driver
To install the unit at the user premises
1.
Run all desired power, siren and hardware contact wires to the panel location.
2.
Remove metal cabinet knockouts required for wiring entry.
3.
Level the cabinet on sturdy wall and mark the mounting holes with a pencil.
4.
Tight all the 4 screws of the cabinet.
Backside of TS21I-HC