ViewZ VZ26PVM, Инструкция по эксплуатации

Страница: 19 / 41

Motion Detection (Built-in PIR sensor; Passive Infra-Red)
Option Function Value
Detection Enable Activates the Motion Detection feature. Off or On
Detection Input Selects the input source for the Motion Detection.
AV1, AV2, S-Video, RGB
PC, DVI, HDMI, Component
or C/R
Buzzer
Activates an audible signal when the monitor
receives a motion detection signal.
On or Off
Detection Time
Selects the amount of time, in seconds,
that the monitor displays the motion detection
input image.
3 ~ 100
Detection Option Inactivated.
Display Type
Selects the mode in which the monitor displays
the motion detection input. The monitor takes one
of the following actions:
- PIP & FULL: Displays the motion detection input
in the PIP of the current video input source.
Note : The main video source must support the
motion detection input source as a PIP option.
See section
“
Input Source
” in “
C. PIP
”.
- FULL: Switches the display to show the motion
detection input in the full screen.
PIP & FULL or FULL
INSTRUCTION MANUAL
………………………………………………………………………. 17