C mount ring
CS mount
Manual
IRIS
LENS CONNECTION
Auto
IRIS
LENS CONNECTION
DIMENSIONS
Contact ViewZ
• Address : 177 W. Orangethorpe Ave., Placentia, CA 92870
• This device may not cause harmful interference
• This device must accept any interference received, including interference
that may cause undesired operation.
• Phone : (714) 996-1177, Fax : (714) 996-1138
• Specification subject to change without notice.
PRECAUTIONS
REGULATORY NOTICE
Do not use the camera if fumes, smoke or a strange odor is emitted from
the unit, or if it seems to not function correctly. Disconnect the power source
immediately and consult your supplier.
1. Please check whether lens mount type is a C mount or CS mount.
2. CS mount type:
connect the lens, removing the protective rubber.
C mount type:
attach the C mount ring and connect the lens.
3. Go to the camera setup and set the LENS mode as MANUAL.
1. Connect the lens just like the manual lens connection.
2. Connect the auto IRIS lens connector to the connector on the rear
panel.
3. Go to the camera setup and set the LENS mode as AUTO.
Always follow the instructions in the installation guide when applying
power. Fire and equipment damage can occur if power is applied
incorrectly. For the correct power supply, refer to the specification sheet.
If installed close to a TV, radio transmitter, magnet, electric motor
transformer or audio speakers the magnetic field generated may interfere
with or distort the image.
Do not install or operate in small, unventilated areas. Heat build up can
significantly reduce the performance and operating life of the product and may
cause a fire.
Whether or not the camera is used outdoors, never point it toward the
sun. Use caution when operating the camera in the vicinity of spot lights or
other bright lights and light reflecting objects.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
To prevent damage, do not drop the camera or subject it to strong shock or
vibration.
Do not use the camera in extreme environments where high temperatures or
high humidity exists. Use the camera under conditions where temperatures are
between 14°F ~ 122°F (-10°C ~ 50°C), and humidity is below 90%.
VZ-HDC-8
LENS
POWER
DC12V
CVBS
HD-SDI
D&N IN
Ground
M/D OUT
RS485 -
RS485 +
DC-TYPE
DAMPCOIL-
D
DR
DRIVECOIL-
Auto Iris Lens Connecto
r
4.33” / 110 mm
2.36” / 60mm
LENS
POWER
DC12V
CVBS
HD-SDI
D&N IN
Groun
d
M/D OUT
RS485 -
RS485 +
1080 HD-SDI | True WDR
Box Camera
