4
Introduction
The SXT1811 is an 18.1” SXGA (1280 x 1024) TFT industrial flat panel monitor for use in NEMA
4 and NEMA 12 applications. Graphics and text can be displayed on the monitor in up to 16.7 million
colors and in the modes listed below. Additionally, PAL NTSC and SECAM video can be displayed either
full screen or as a picture in picture overlaid on the PC screen. When the monitor is being driven in
modes other than SXGA, it will automatically expand and scale the image to fill all 1280 x 1024 pixels.
The unit is fully self-contained needing only to be panel mounted in an appropriate enclosure and
connected to 120/240 VAC and a VGA source. The monitor features a bright 200-nit LCD display with
50,000-hour backlights and conveniently located front panel controls with on screen menus for easy set
up and adjustment. Viewing angle is 160 degrees vertical and 160 degrees horizontal. The SXT1811 is
available with an optional integrated analog resistive touch screen, 304 stainless steel bezel and 18-
36VDC input. Each SXT1811 is shipped complete with user manual, mounting hardware and all cables.
Monitors equipped with touch screens are shipped with drivers for Windows 95 , 98 and Windows
NT .
Video Modes Supported
EXPANSION FACTOR
MODE
HORIZONTAL
SYNC RATE
KHZ
VERTICAL SYNC
RATE
Hz
DOT
FREQUENCY
MHZ
Vertical
HORIZONTAL
VGA
VESA
640 x 480
31.5
37.9
37.5
43.3
60
72
75
85
25.175
31.500
31.500
36.000
2
2
IBM
720 X 400
31.5
37.9
70
85
28.322
35.500
1.7
1.7
SVGA
VESA
800 x 600
35.1
37.9
48.1
46.9
53.7
56
60
72
75
85
36.000
40.000
50.000
49.500
56.250
1.5
1.5
XGA
VESA
1024 x 768
INTERLACED
48.4
56.5
57.5
60.0
68.7
35.5
60
70
72
75
85
87
65.000
75.000
75.000
78.780
94.500
44.900
1.25
1.25
SXGA
VESA
1280 X 1024
64.0
78.1
80.0
60
72
75
108.000
135.000
135.000
1
1
