2
3
6.
NOTE the following regarding the tip of the insertion tube, which is
the most delicate part of this video borescope:
a. Do not impact the tip of the insertion tube while inserting or
maneuvering inside the equipment being borescoped.
b. Manipulate the joystick gently. Rapid movement of the joystick while
borescoping may cause abrupt impact with the machinery and result
in damage to the camera/LED module.
7.
If the lens is dirty or greasy, it may be cleaned by wiping with alcohol.
8.
DO NOT force the joystick! If there is unusual resistance to joystick
movement while conducting an inspection, it is because there is physical
resistance inside the inspection area. Trying to force the joystick in this
situation will result in damage to the articulation control wires, the joystick
assembly or to the equipment being inspected.
9.
DO NOT impact, press or scratch the LCD monitor.
10.
DO NOT cover the unit with a plastic bag or other similar protective
covering during use. It may cause the unit to overheat and damage the
internal circuitry.
11.
DO NOT use or store the borescope in a high temperature, high humidity
or high radiation environment.
BATTERY AND BATTERY CHARGING
Follow the instructions below for battery care and proper charging,
to prevent leakage, overheating, smoke, explosion, electric shock
and burns.
DANGER
1. Only use batteries and chargers specially designed for this borescope:
18650B battery with PCB-protection (button top).
2. Be sure the battery is placed into the slot in the correct direction (+ /–).
3. Do not carry or store the battery where it may collide with metal objects.
4. Always keep the batteries away from fire or other sources of intense heat,
as it will cause an explosion.
5. Do not attempt to open or modify batteries, as this could lead to an explo-
sion or fire.
6. Do not immerse the battery in liquid of any kind.
7. Do not charge the battery near an open flame, as it could lead to
an explosion or fire.
8. Do not drop, puncture, impact or apply pressure to the battery as it could
lead to an explosion or fire.
WARNING
1. Use only 3.6V lithium batteries, model 18650B with PCB-protection
(button top).
2. Submit a repair request immediately in case of battery leakage,
discoloration, deformation or abnormal condition.
3. Clean immediately with tap water if your skin or clothing comes into
contact with a leaking battery.
4. Keep the battery charger free of any covering during charging.
5. Do not charge the battery in the vicinity of flammable gas or materials.
ATTENTION
1. Do not use or store the battery or borescope in a high-temperature envi-
ronment, such as direct sunlight, closed cars or near heating equipment.
2. The battery will heat up during prolonged operation. Do not remove
immediately after use, as this could cause burns.
3. Keep battery and borescope out of the reach of children.
4. Do not touch the battery electrodes with wet hands.
5. Fully charge the battery before use and after extended use.
6. Remove the battery from the borescope if the scope will not be used for
more than 30 days, otherwise, it may cause damage to the borescope, fire
or personal injury.
REMINDER
1. This is a high-output battery. Please use the battery properly or it may
cause damage from leakage or excessive heat. Always check the
orientation/polarity and load it into the chamber correctly.
2. Battery performance will decrease as the ambient temperature drops.
Performance will be restored once the ambient temperature rises.
3. Recycle the battery in accordance with the local regulations at the
end of its useful life.
4. Recommended temperature range for this lithium ion battery is:
Discharging (in use): 0°C to 40°C (32°F to 104°F)
Charging: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 50°C (14° to 122°F)
5. Using, charging, or storing the battery at a temperature out of the above
range will reduce the battery’s performance and service life.
6. Be sure to remove the battery from the borescope for long term storage.
