ViewSonic VT3250LED, Руководство пользователя

Страница: 49 / 58

40 41
Subtitle
Analogue
Subtitle
To display the transmitted subtitle on the screen. Either this text can
be permanently displayed (assuming that the service is available in
the broadcast) or only when mute is active.
1st Subtitle
Use the digital subtitle function when two or more subtitle languages
are broadcast. If subtitle data in a selected
language is not broadcast, the default language subtitle will be
displayed.
2nd Subtitle
Subtitle Type To choose the subtitle type from Normal or Hearing impaired .
Teletext
Language
Digital Teletext
Language
To select the teletext language.
Decode Page Lang. To set the teletext language to the regional location.
Common
Interface
This menu appears with your CI supplier information.
HDMI Scan Info
Automatic
Set to underscan or overscan automatically when the video signal is
detected.
Underscan
When the video signal is detected, all active pixels and lines are
displayed with or without border.
Overscan
When the video signal is detected, some active pixels and lines at
the edges are not displayed.
OAD
When you get the updating news from the TV shop’s web, you can update the operation
software using the Download menu. The data for various units are transferred consecutively
on a special receiving channel.
You need to search the channel with updating code stream.
Note: You must not switch off the unit during this process.
Parental
A password is required to gain access to this function. The factory default password is
“1234”.
Channel Block
To block certain TV channels.
Parental
Guidance
To control access programmes based on their age ratings. All
settings apply to digital channels.
Input Block To disable the specific external input signals.
Set Password
To set or change your password. Please follow the instructions to
set it. All number combinations from 0000 to 9999 are valid.
Clear All To clear all the settings in the parental submenu.
No Signal Off
On
TV enters standby mode when there has on singal input for 30
minutes.
Off This feature can be switched off.
No Operation Off
On
TV enters standby mode when there has no operation on remote
control or keypad.
Off This feature can be switched off.
Reset Default To reset all TV settings to the original factory values.
SW Ver. Displays the software version.