ViewSonic VT3205LED Скачать руководство пользователя страница 11

ENGLISH

ix

ViewSonic

                                                                                                               VT3205LED

Use in outdoor

This TV is not designed for outdoors 
installation. Do not expose the TV to rain, 
as it may result in a fire or an electric shock. 

Also, do not expose the TV to direct sunlight, 

as it may heat up and become damaged.

Vehicle, ships and other vessels

Do not install this TV in a vehicle.  
Car accidents may cause the TV to fall down and 
cause injury.
Do not install this TV in a ship or vessel.
If the TV is exposed to seawater, it may cause a 
fire or damage the TV.

Medical institutions

Do not place this TV in a place where medical equipment is in 
use. It may cause the medical equipment to malfunction.

VOLUME ADJUSTMENT

• Adjust the volume to avoid disturbing your neighbors. 

 

Sound carries easily at night. Therefore, we suggest you close 

the windows or use headphones.

• 

When using headphones, adjust the volume to appropriate 
levels, or hearing damage may result.

LCD SCREEN

• Although the LCD screen is made with high precision 

technology and has effective pixels of 99.99% or more, black 
dots or bright points or light (red, blue, or green) may appear 
constantly on the LCD screen. This is a structural property of 
the LCD panel and is not a malfunction.

• 

The LCD screen is made with high-precision technology. To 
achieve a high level of performance and picture quality, this 
TV’s backlight setting is set to maximize the brightness of 
the TV. However, uneven brightness may be observed when 
the LED TV is viewed in a dark environment without an input 
source or a blank screen. This is a normal condition, not a 
malfunction of the TV. To improve this condition, change the 

Picture mode, Backlight setting, enable the Light Sensor, or 

turn on the Power management.

• Avoid exposing the LCD screen surface to direct sunlight. It 

is likely to damage the LCD panel.

• 

Do not push or scratch the LCD screen, or place objects on 
top of the TV. The image may be uneven or the LCD panel 
may be damaged.

• 

If the TV is used in a cold place, a smear may occur in the 
picture or the picture may become dark. It is not caused by a 
failure. This condition will improve as the temperature rises.

• 

When still pictures are displayed continuously, ghosting may 
occur. It should disappear after a short period of time.

• 

The screen and cabinet get warm when the TV is in use. This 
is a normal condition. 

• Spraying insect repellent with volatile material on the screen 

will cause damage.

• 

Do not make prolonged contact with rubber or plastic 
material.

Broken pieces

Do not throw anything at the TV.
Doing so may break the screen glass and cause 
serious injury.

If the surface of the TV cracks, unplug the AC 

power cord before touching the TV. Otherwise electric shock 
may result.

Handling of broken glass and liquid  

crystal leakage

If the LCD panel gets damaged, crystalline liquid leakage may 
occur, or scattered broken glass may result. Do not touch broken 
glass or crystalline liquid which is toxic, with bare hands as 

cuts, poisoning or skin irritation may occur. Also do not glass 

fragments or leaked crystalline liquid get into your eyes or 

mouth. Should either contacted your eyes or mouth, rinse the 

contacted area thoroughly with water and consult your doctor.

SERVICING

Do not attempt to repair the TV yourself, 
since opening the cabinet may expose you 

to dangerous voltage or other hazards. Ask 

qualified service personnel to do the servicing 
for your TV.

Replacement parts

When replacement parts are required, be sure the service 
technician certifies in writing that he/she has used replacement 
parts specified by the manufacturer that have the same 
characteristics as the original parts. Unauthorized substitutions 
may cause a fire, an electric shock or other hazards.

Safety check

Upon completion of repairs to the TV, ask the service 
technician to perform routine safety checks (as specified by the 
manufacturer) to determine that the TV is safe for operating, and 
to so certify.

Ask a qualified service technician to dispose of the TV.

For Customers in the United States

There is mercury in the lamp of this product.
Disposal of these materials may be regulated due to 
environmental considerations. For disposal or recycling 
information, please contact your local authorities or the 

Electronic Industries Alliance (http//www.eiae.org).

Содержание VT3205LED
































































Отзывы: