ViewSonic VS18969 Скачать руководство пользователя страница 76

Страница: 76 / 77

Maintenance

General Precautions

•

Make sure the Projector is turned off and the power cable is unplugged from the

power outlet.

• Never remove any parts from the Projector. Contact ViewSonic® or a reseller

when any part of the Projector needs replacing.

• Never spray or pour any liquid directly onto the case.

•

Handle the Projector with care, as a darker-colored projector, if scuffed, may

show marks more clearly than a lighter-colored projector.

Cleaning the Lens

• Use a canister of compressed air to remove dust.

•

If the lens is still not clean, use lens-cleaning paper or moisten a soft cloth with

lens cleaner and gently wipe the surface.

CAUTION:

Never rub the lens with abrasive materials.

Cleaning the Case

•

Use a soft, lint-free, dry cloth to remove dirt or dust.

•

If the case is still not clean, apply a small amount of non-ammonia, non-alcohol

based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe

the surface.

CAUTION:

Never use wax, alcohol, benzene, thinner, or other chemical detergents.

Storing the Projector

If you intend to store the Projector for an extended period of time:

• Ensure the temperature and humidity of the storage area are within the

recommend range.

• Retract the adjuster foot completely.

•

Remove the batteries from the Remote Control.

• Pack the Projector in its original packaging or equivalent.

Disclaimer

• ViewSonic® does not recommend the use of any ammonia or alcohol-based

cleaners on the lens or case. Some chemical cleaners have been reported to
damage the lens and/or case of the projector.

•

ViewSonic® will not be liable for damage resulting from use of any ammonia or

alcohol-based cleaners.

Содержание VS18969














































































Результаты поиска

Содержание VS18969

Отзывы:

Похожие инструкции для VS18969

Бренды по названию

Популярные бренды

ViewSonic VS18969, Руководство пользователя

Результаты поиска

Содержание VS18969

Отзывы:

Похожие инструкции для VS18969

Бренды по названию

Популярные бренды