Other Information
32
Problem
Possible Solution
Remote control unit does not
operate
Make sure the batteries are inserted correctly.
•
Batteries could be weak or dead. Replace with new batteries.
•
Check if there is a fluorescent light illuminated near the remote control
•
sensor.
The path of the remote control beam may be blocked. Make sure the
•
path is clear and that the remote control is aimed at the remote control
sensor on the TV.
Press
•
on the remote control to see if you can turn on the TV.
Press
•
MENU
on the remote control to see if there is an OSD menu
shown on the screen.
Press only one button at a time and it is the correct one for the
•
operation you want to perform.
Unit cannot be operated
External influences such as lightning or static electricity may cause
•
improper operation. In this case, operate the unit after first turning on
the power of the TV and the AVC System, or unplug the AC cord for 1
to 2 minutes, then replug again.
Power is cut off suddenly
Make sure the sleep timer is turned off.
•
Make sure the PC or video signal cable is connected properly.
•
The internal temperature of the unit has increased. Remove any objects
•
blocking the vent or clean as necessary.
No CATV reception (or no
reception above CH13)
Set the correct
•
Signal Type
(Air / Cable) on the
Channel
menu.
CATV is connected improperly or not connected; please check all the
•
CATV connections.
The cable TV service is interrupted; please contact your cable operator.
•
Adjust the location of the antenna, place it far from roads or sources of
•
interference.
Picture is cut off/with sidebar
screen
Make sure the video signal cable is connected properly.
•
Adjust the
•
Screen Size
setting on the
Picture
menu.
Press
•
ASPECT
repeatedly on the remote control to switch to the
display mode you prefer.
Содержание VS14652-1M
Страница 55: ......
