5-3 Function Test and Alignment Procedure
1. All Modes Reset
You should do “All Model Reset” (Refer to Chap 3. Hot Keys for Function Controls) first. This
action will allow you to erase all end-user’s settings and restore the factory defaults.
2. Auto Image Adjust
The Auto Adjust is aimed to offer a best screen quality by built-in ASIC. For optimum screen
quality, the user has to adjust each function manually.
A.Turn the computer and LCD monitor on.
B. Press the ‘
Auto
’ button on monitor keypad to Auto Adjust.
C. The LCD monitor will start the Auto Adjust process automatically and run for 10 consecutive
seconds, during which time you will notice the image change.
3. Firmware
Test Patten : Burn in Model (Refer to Chap3. Hot Keys for Function Control)
-Make sure the F/W is the latest version.
4. DCC
Test Patten: EDID program
-Make sure it can pass test program.
5. Window Shut Down
Test Signal: 1280*1024@60Hz
Test Pattern:
6. BIOS update procedure
BIOS Update User Guide
For ViewSonic
33
ViewSonic
Corporation
Co
nfidential
-
Do
Not
Copy
VA
912/b
Содержание VS10696
Страница 35: ...Figure 5 Figure 8 Figure 7 Figure 6 Figure 5 32 ViewSonic Corporation Confidential Do Not Copy VA912 b ...
Страница 42: ...5 Select gm5126AA_AB Select gm5126AA_AB 39 ViewSonic Corporation Confidential Do Not Copy VA912 b ...
Страница 91: ...11 PCB Layout Diagrams 88 ViewSonic Corporation Confidential Do Not Copy VA912 b ...