![background image](http://html.mh-extra.com/html/viewsonic/vs10047/vs10047_service-manual_1021436017.webp)
■
DDC Channel:4 pins
Name I/O
Pin
No
Description
Note
DDCSCL/TCON [0] /
BBLU [1]
I
46
DDC serial control I/F clock/TCON [0]/TTL
BBLU [1]
(2), (3), (5)
DDCSDA/TCON [1] /
PWM1/BBLU [0]
IO
47
DDC serial control I/F data input/ output/
TCON [1]/ PWM1/ TTL BBLU [0]
(1), (2), (3), (5),
(6), (8)/8mA/no
slew
TCON [5]
I
126
TCON [5]
(2), (3), (5)
TCON [7]/PWM1
IO
125
TCON [7]/ PWM1
(1), (2), (3), (5),
(6), (8)/8mA/no
slew
■
Power & Ground:22 pins
Name I/O
Pin
No Description
3.3V Power
P
49,121
VCCIO: 2
3.3V Ground
G
48,120
GNDIO: 2
3.3V Power
P
58,71,83, 95,110
PVCC: 5
3.3V Ground
G
57,72,84,96,109
PGND: 5
2.5V Power
P
45,69,98,127
VCCK: 4
2.5V Ground
G
44,70,97,128
GNDK: 4
Note: (1) TTL compatible CMOS Input (Vt=1.7V); VCC=3.3V;
(2) 5V tolerance pad;
(3) Internal 75K Ohms pull high resistor.
(4) Internal 75K Ohms pull low resistor.
(5) Schmitt trigger CMOS Input (Vt=1.4~2.2V);
(6) Open-Drain, Output Drive low & Pull-high.
(7) Bi-directional input/output
(8) Programmable driving current (2~10mA)
(9) TTL output 5V & 3.3V
(10) 4V tolerance pad
B.
MTV312M64
The MTV312M micro-controller is an 8051 CPU core embedded device especially tailored for CRT/LCD
Monitor applications. It includes an 8051 CPU core, 1024-byte SRAM, 14 built-in PWM DACs, VESA DDC
interface, 4-channel A/D converter, and a 64K-byte internal program Flash-ROM.
A “CMOS output pin” means it can sink and drive at least 4mA current. It is not recommended to use such
pin as input function.
A “open drain pin” means it can sink at least 4mA current but only drive 10~20uA to VDD. It can be used as input
or output function and needs an external pull up resistor.
A “8051 standard pin” is a pseudo open drain pin. It can sink at least 4mA current when output is at low level, and
drives at least 4mA current for 160nS when output transits from low to high, then keeps driving at 100uA to
maintain the pin at high level. It can be used as input or output function. It needs an external pull up resistor when
driving heavy load device.
POWER CONFIGURATION
The MTV312M can work on 5V or 3.3V power supply system.
In 5V power system, the VDD pin is connected to 5V power and the VDD3 needs an external capacitor, all
output pins can swing from 0~5V, input pins can accept 0~5V input range.
And ADC conversion range is 5V. However, X1 and X2 pins must be kept below 3.3V.
In 3.3V power system, the VDD and VDD3 are connected to 3.3V power, all output pins swing from 0~3.3V,
HSYNC, VSYNC and open drain pin can accept 0~5V input range, other pins must be kept below 3.3V. And the
ADC conversion range is 3.3V.
14
ViewSonic
Corporation
Co
nfidential
-
Do
Not
Copy
VE710s/b-2
VA721
Содержание VS10047
Страница 63: ...11 2 MAIN PCB BOTTOM VIEW 60 ViewSonic Corporation Confidential Do Not Copy VE710s b 2 VA721 ...
Страница 65: ...11 5 POWER PCB TOP VIEW 62 ViewSonic Corporation Confidential Do Not Copy VE710s b 2 VA721 ...
Страница 66: ...11 6 POWER PCB BOTTOM VIEW 63 ViewSonic Corporation Confidential Do Not Copy VE710s b 2 VA721 ...