VG700b Series Service Manual
3-1
VG700b series
Chapter 3 Procedure of Disassembly
3-1
Disassembly of Stand Unit and Main Body
1.
Lay VG700b Monitor face down to take off Rear Arm and Hinge Cap.
2.
Unscrew the four screws to remove the Stand and Main Unit.
1
Rear Arm
Hinge Cap
3.
Unscrew the four screws to remove the Hinge Tilt and Base Unit.
4.
Unscrew the four screws on Hinge Tilt unit to remove the Front Arm and Hinge Tilt.
5.
Unscrew the four screws on the Base Unit to
the Base Cover and Base Plate.
Hinge Tilt Unit
Stand Unit
4
Main Unit
2
1
3
Base Cover
Base Plate
5
ViewSonic Corporation
Confidential
– Do Not Copy
VG700b
remove
