![background image](http://html1.mh-extra.com/html/viewsonic/va1703w-1/va1703w-1_service-manual_1020652005.webp)
2
ViewSonic Corporation
Confidential - Do Not Copy
VA1703w-1_VA1703wb-1
human earth when handling.
(7) Do not open nor modify the Module Assembly.
(8) Do not press the reflector sheet at the back of the module to any directions.
(9) In case if a Module has to be put back into the packing container slot after once it was
taken out from the container, do not press the center of the CCFL Reflector edge.
Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT
Module may be damaged.
(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for
example),
do not twist nor bend the TFT Module even momentary. At designing the enclosure, it
should be taken into consideration that no bending/twisting forces are applied to the
TFT Module from outside. Otherwise the TFT Module may be damaged.
(12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please
follow local ordinances or regulations for disposal.
(13) Small amount of materials having no flammability grade is used in the LCD module.
The LCD module should be supplied by power complied with requirements of Limited
Power Source, or be applied exemption.
(14) The LCD module is designed so that the CFL in it is supplied by Limited Current
Circuit.
Do not connect the CFL in Hazardous Voltage Circuit.
Содержание VA1703w-1
Страница 42: ...39 ViewSonic Corporation Confidential Do Not Copy VA1703w 1_VA1703wb 1 7 Block Diagram...
Страница 54: ...51 ViewSonic Corporation Confidential Do Not Copy VA1703w 1_VA1703wb 1...
Страница 57: ...11 10 9 8 7 6 5 4 3 2 1 54 ViewSonic Corporation Confidential Do Not Copy VA1703w 1_VA1703wb 1...