ViewSonic SC-T25 VTOS, Руководство пользователя

Страница: 45 / 56

38
In the case of a USB Printer using standard RDP or a Network Printer you must
configure CUPS on the NUC to enable the remote system to see the Printer.
Just select Web Mode to launch Chrome and then click on the Configure printers
Bookmark at the top left. Chrome will connect to the Local CUPS Server running on
VTOS Please Google CUPS (Common Unix Printing System) for the fine print on
how to set up CUPS printing. For the best results when you set up your local printer
you should consider providing the Windows PPD file instead of using the closest
Linux Printer Driver. This is particularly important for Multi Function Printers where
no Linux PPD driver exists Once you have the Windows PPD file extracted from your
Windows installation Disk you can use VDM3.0 to copy the PPD file to your VTOS
device. To copy the PPD file use VDM3.0 -> Upload -> select PPD file.
When you configure CUPS, select this PPD file, reboot the VTOS device to save
the PPD file to flash. You can also configure a Printer using CUPS as a RAW printer
where the Server Printer Driver does all the work before sending the Raw data to the
Printer.
How do I get out of fullscreen mode?
It depends on what mode you’re in: HDX: shift-f2. Allegedly. RDP and RemoteFX:
control-alt-enter. This will release pointer grab, but the FreeRDP window will still
intercept keystrokes while the window is in focus. Spice: shift-f11 (and then shift-f12
to ungrab the keyboard and pointer). VNC: control-alt-shift-f, or use f8 to bring up the
configuration menu and click on Full Screen to toggle it off. X11: you can’t, but you
can use control-shift to toggle key grab between local and remote window managers.
This will allow you to use local keyboard shortcuts such windows-d to show the
desktop, control-alt to switch windows and so forth. Everything else: there is no
fullscreen mode, you just have a window that’s been sized to fit the current screen
resolution. You can use normal window manager controls to resize or minimize it.
I tried changing resolution but now my screen is black/
my monitor says “scan rate out of range”. I don’t have
VDM3.0/ can’t get someone else to change settings using
VDM3.0. What can I do?
Use the appropriate key sequence to exit from fullscreen mode for whichever
protocol you are currently using (see “How do I get out of fullscreen mode”, above),
and then press the control-alt-r key combination twice within two seconds. This will
cause your client to reset to a safe default resolution (1024x768) and reboot.
Is there a way to bring up the configuration tool other than
from the dialog window that comes up after a session has
ended? I don’t want to close my application right now.
Yes. First exit fullscreen or defocus your fullscreen application (see “How do I get out
of fullscreen mode”, above) and then use the control-alt-c key combination.