43
Using the projector in standby mode
Some of the projector functions are available in standby mode (plugged in but not turned
on). To use these functions, be sure the cable connections are correctly made. For the
connection methods, see the
chapter.
Active VGA Out
Selecting
On
in the
POWER MANAGEMENT
>
Standby Settings > Active VGA Out
outputs a VGA signal when the
Computer 1
and
Monitor Out
sockets are correctly
connected to devices. The projector outputs the signal received only from
Computer 1
.
Active Audio Out
Selecting
On
in the
POWER MANAGEMENT
>
Standby Settings > Active Audio Out
outputs an audio signal when the
Audio In
and
Audio Out
sockets are correctly connected
to a proper device.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker. Be sure
you have made a correct connection to the projector audio input/output jacks. See
for more details.
Muting the sound
1.
Open the OSD menu and go to the
BASIC
>
Audio Settings
>
Mute
menu.
2.
Press
/
to select
On
.
Adjusting the sound level
1.
Open the OSD menu and go to the
BASIC
>
Audio Settings
>
Audio Volume
menu.
2.
Press
/
to select a desired sound level.
If available, you can press
/
/
on the remote control to adjust the projector’s sound
level.
Turning off the Power On/Off Ring Tone
1.
Open the OSD menu and go to the
BASIC
>
Audio Settings
>
Power On/Off Ring
Tone
menu.
2.
Press
/
to select
Off
.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
Содержание PS500X
Страница 90: ......
