ViewSonic Pro10 Series Скачать руководство пользователя

Страница: 34 / 88

Contrast

The contrast controls the degree of difference between the lightest and the darkest

parts of the picture. Adjusting the contrast changes the amount of black and white in

the image.

Press the ◄ button to decrease the contrast.

Press the ► button to increase the contrast.

Sharpness

Adjust the sharpness of the image.

Press the ◄ button to decrease the sharpness.

Press the ► button to increase the sharpness.

Saturation

Adjust a video image from black and white to fully saturated color.

Press the ◄ button to decrease the color saturation in the image.

Press the ► to increase the color saturation in the image.

Tint

Adjust the color balance of red and green.

Press the ◄ button to increase the amount of green in the image.

Press the ► button to increase the amount of red in the image.

“Color” and “Tint” are only supported for composite and component sources.

Содержание Pro10 Series

























































































Результаты поиска

Содержание Pro10 Series

Отзывы:

Похожие инструкции для Pro10 Series

Бренды по названию

Популярные бренды

ViewSonic Pro10 Series, Руководство пользователя

Результаты поиска

Содержание Pro10 Series

Отзывы:

Похожие инструкции для Pro10 Series

Бренды по названию

Популярные бренды