ViewSonic PJL7211 Скачать руководство пользователя

Страница: 62 / 71

PJL7211

ViewSonic

Phenomena that may be easy to be mistaken for machine defects

About the phenomenon confused with a machine defect, check and cope with it

according to the following table.

Phenomenon

Cases not involving a machine defect

Reference

page

Power does not

come on.

The electrical power cord is not plugged in.

Correctly connect the power cord.

The main power source has been interrupted during

operation such as by a power outage (blackout), etc.

Please disconnect the power plug from the power outlet,

and allow the projector to cool down at least 10 minutes,

then turn the power on again.

11, 14

Either there is no lamp and/or lamp cover, or either

of these has not been properly fixed.

Please turn the power off and disconnect the power plug from

the power outlet, and allow the projector to cool down at least

45 minutes. After the projector has sufficiently cooled down,

please make confirmation of the attachment state of the lamp

and lamp cover, and then turn the power on again.

49, 50

No pictures are

displayed.

The signal cables are not correctly connected.

Correctly connect the connection cables.

Signal source does not correctly work.

Correctly set up the signal source device by referring to the

manual of the source device.

–

The input changeover settings are mismatched.

Select the input signal, and correct the settings.

The brightness is adjusted to an extremely low level.

Adjust BRIGHTNESS to a higher level using the menu

function.

The computer cannot detect the projector as a plug

and play monitor.

Make sure that the computer can detect a plug and play

monitor using another plug and play monitor.

The BLANK screen is displayed.

Press the

BLANK

button on the remote control.

(Continued on next page)

Содержание PJL7211








































































Результаты поиска

Содержание PJL7211

Отзывы:

Похожие инструкции для PJL7211

Бренды по названию

Популярные бренды

ViewSonic PJL7211, Руководство пользователя

Результаты поиска

Содержание PJL7211

Отзывы:

Похожие инструкции для PJL7211

Бренды по названию

Популярные бренды