ViewSonic PJL7211 страница 61 Скачать руководство пользователя

Страница: 61 / 71

PJL7211

ViewSonic

Regarding the indicator lamps (continued)

• When the interior portion has become overheated, for safety

purposes, the projector is automatically shut down, and the indicator lamps

may also be turned off. In such a case, disconnect the power cord, and wait at

least 45 minutes. After the projector has sufficiently cooled down, please make

confirmation of the attachment state of the lamp and lamp cover, and then turn

the power on again.

NOTE

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Blinking

Red

Lighting

Red

Turned

off

Lighting

Red

There is a possibility that the interior portion

has become heated.

Please turn the power off, and allow the projector to cool down at least

20 minutes. After the projector has sufficiently cooled down, please make

confirmation of the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air filter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the remedy, please set FAN

SPEED of SERVICE item in OPTION menu to HIGH.

Lighting

Green

Simultaneous

blinking in

Red

It is time to clean the air filter.

Please immediately turn the power off, and clean or

change the air filter referring to the section “Cleaning

and replacing the air filter”. After cleaning or changing

the air filter, please be sure to reset the filter timer.

After the remedy, reset the power to ON.

Lighting

Green

Alternative

blinking in

Red

There is a possibility that the interior portion

has become overcooled.

Please use the unit within the usage temperature

parameters (5°C to 35°C).

After the treatment, reset the power to ON.

Shutting the projector down

Only when the projector can not be turned off by usual

procedure, please push the shutdown switch using a pin

or similar, and disconnect the power plug from the power

outlet. Before turning it on again, wait at least 10 minutes

to make the projector cool down enough.

Resetting all settings

When it is hard to correct some wrong settings, the FACTORY RESET function

of SERVICE item in OPTION menu can reset all settings (except LANGUAGE,

FILTER TIME, LAMP TIME, FILTER MESSAGE and SECURITY settings and etc.)

to the factory default.

Shutdown switch

Содержание PJL7211








































































Результаты поиска

Содержание PJL7211

Отзывы:

Похожие инструкции для PJL7211

Бренды по названию

Популярные бренды

ViewSonic PJL7211, Руководство пользователя

Результаты поиска

Содержание PJL7211

Отзывы:

Похожие инструкции для PJL7211

Бренды по названию

Популярные бренды