ViewSonic PJL6243 Скачать руководство пользователя страница 26

Страница: 26 / 177

ViewSonic

PJL6243

TO MAINTAIN THE LIFE OF THE LAMP,

ONCE YOU TURN THE PROJECTOR ON,

WAIT AT LEAST FIVE MINUTES BEFORE

TURNING IT

OFF .

Power off?

disappears after 4 seconds.

Turning Off the Projector

Press the ON/STAND-BY button on the top control

or on the remote control, and

Power off?

appears

on the screen.

Press the ON/STAND-BY button again to turn off

the projector. The POWER indicator lights red and

the cooling fans stop (default setting), and you can

unplug the AC power cord.

is selected in Fan menu (p.55), the POWER

indicator starts to blink red and the cooling fans keep

running for about 60 seconds, then the POWER

indicator lights red and the cooling fans stop. You

can unplug the AC power cord even if the cooling

fans are still running.



Note:

• When the Direct on function is set to

the projector will be turned on automatically

by connecting the AC power cord to an AC

outlet (p.49).

• The running speed of cooling fans is

changed according to the temperature inside

the projector.

• Do not put the projector in a case before the

projector is cooled enough.

• If the WARNING indicator blinks or lights red,

see “WARNING indicator” on page 58.

• While the POWER indicator is blinking, the

lamp is being cooled down and the projector

cannot be turned on. Wait until the POWER

indicator stops blinking to turn on the

projector again.

• The projector can be turned on after the

POWER indicator lights red.

• When

is selected in Fan menu (p.55) and

the projector is turned on right after it turns

off, it takes a while to start projecting.

Basic Operation

DO NOT OPERATE THE PROJECTOR

CONTINUOUSLY WITHOUT REST.

CONTINUOUS USE MAY RESULT IN

SHORTENING THE LAMP LIFE. TURN OFF

THE PROJECTOR AND LET STAND FOR

ABOUT AN HOUR IN EVERY 24 HOURS.



Note:

When using the Direct Off function, you can not

restart the projector immediately after the power

is disconnected. If the external power supply is

suddenly cut off, the fans stop immediately. The

lamp remains high temperature and needs to be

cooled.

You can disconnect the power cord from the wall outlet

or turn off the breaker even during projection without

pressing the ON/STAND-BY button.

Direct Off Function

Содержание PJL6243


















































































































































































Результаты поиска

Содержание PJL6243

Отзывы:

ViewSonic PJL6243, Руководство пользователя, Страница: 26 / 177

Результаты поиска

Содержание PJL6243

Отзывы: