43
If the preset time lengths are not suitable for your need, select
Disable
. The projector will
not automatically shut down in a certain time period.
Setting Power Saving
T
he projector lowers the power consumption if no input source is detected after 5 minutes to
prevent unnecessary waste of lamp life. You can further decide if you would like the
projector to turn off automatically after a set period of time.
1.
Open the OSD menu and go to the
SOURCE
>
Smart Energy
menu
.
2.
Press
Enter
and the
Smart Energy
page is displayed.
3.
Highlight
Power Saving
and press
/
.
4.
When
Disable
is selected, the projector power will be reduced to 30% after no signal
is detected for 5 minutes.
If you select
10 min
,
20 min
or
30 min
, the projector power will be reduced to 30%
after no signal is detected for 5 minutes. And when
10 min
,
20 min
or
30 min
is up,
the projector will turn off automatically.
Setting Sleep Timer
This function allows the projector to turn off automatically after a set period of time to
prevent unnecessary waste of lamp life.
1.
Open the OSD menu and go to the
SOURCE
>
Smart Energy
menu
.
2.
Press
Enter
and the
Smart Energy
page is displayed.
3.
Highlight
Sleep Timer
and press
/ .
4.
If the preset time lengths are not suitable for your presentation, select
Disable
. The
projector will not automatically shut down in a certain time period.
Timing of replacing the lamp
When the
Lamp indicator light
lights up red or a message appears suggesting it is time to
replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a
malfunction in the projector and in some instances the lamp may explode.
CAUTION
The Lamp indicator light and Temperature indicator light will light up if the lamp becomes too
hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp indicator light or
Temperature indicator light still lights up after turning the power back on, please contact your
dealer. See
for details.
The following lamp warning displays will remind you to change the lamp.
Status
Message
Install a new lamp for optimal performance. If the
projector is normally run with
Eco/Dynamic/
SuperEco
selected (See
), you may continue to operate the
projector until the next lamp warning appears.
OK
Order Replacement Lamp
Lamp > ____ Hours
Notice
Содержание PJD5351LS
Страница 72: ......
