ViewSonic LS800HD страница 7 Скачать руководство пользователя

Страница: 7 / 101

Important safety instructions

Your projector is designed and tested to meet the latest standards for safety of information

technology equipment. However, to ensure safe use of this product, it is important that you

follow the instructions mentioned in this manual and marked on the product.

Safety Instructions

Please read this manual before you operate your projector.

Save it for future

reference.

Do not look straight at the projector lens during operation.

The intense light beam

may damage your eyes.

Refer servicing to qualified service personnel.

Always open the lens shutter or remove the lens cap when the projector light

source is on.

In some countries, the line voltage is NOT stable. This projector is designed to operate

safely within a mains voltage between 100 to 240 volts AC, but could fail if power

cuts or surges of

10 volts occur.

In areas where the mains voltage may fluctuate

or cut out, it is recommended that you connect your projector through a power

stabilizer, surge protector or uninterruptible power supply (UPS).

Do not block the projection lens with any objects when the projector is under

operation as this could cause the objects to become heated and deformed or even

cause a fire. To temporarily turn off the light source, press BLANK on the remote

control.

Do not place this product on an unstable cart, stand, or table. The product may fall,

sustaining serious damage.

Do not attempt to disassemble this projector. There are dangerous high voltages inside

which may cause death if you should come into contact with live parts.
Under no circumstances should you ever undo or remove any other covers. Refer

servicing only to suitably qualified professional service personnel.

Do not place this projector in any of the following environments.

- Space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls

and free flow of air around the projector.

- Locations where temperatures may become excessively high, such as the inside of a

car with all windows rolled up.

- Locations where excessive humidity, dust, or cigarette smoke may contaminate optical

components, shortening the projector's life span and darkening the picture.

- Locations near fire alarms

- Locations with an ambient temperature above 40°C / 104°F

- Locations where the altitudes are higher than 3000 m (10000 feet).

10. Do not block the ventilation holes. If the ventilation holes are seriously obstructed,

overheating inside the projector may result in a fire.

- Do not place this projector on a blanket, bedding or any other soft surface.

- Do not cover this projector with a cloth or any other item.

- Do not place inflammables near the projector.

11. Positioning:

This projector can be installed 360

range.

Содержание LS800HD






































































































Результаты поиска

Содержание LS800HD

Отзывы:

Похожие инструкции для LS800HD

Бренды по названию

Популярные бренды

ViewSonic LS800HD, Руководство пользователя

Результаты поиска

Содержание LS800HD

Отзывы:

Похожие инструкции для LS800HD

Бренды по названию

Популярные бренды