ViewSonic LS610HDH Series, Руководство пользователя

Страница: 27 / 75

27
Selecting an Input Source
The projector can be connected to multiple devices at the same time. However, it
can only display one full screen at a time.
The
Input Source
can also be manually selected by pressing one of the source
selection buttons on the remote control, or by cycling through the available input
sources.
To manually select the input source do the following:
1. Press Source , and a source selection menu will appear.
2.
Press
/
until your desired signal is selected and press
Enter
.
3. Once detected, the selected source information will be displayed on the screen
for a few seconds.
NOTE:
If there are multiple devices connected to the projector, repeat steps 1-2 to
search for another source.