3.2 Serial Port / TTL Control
Gimbal Camera
Cable
17.
RX (White)
TX
RX
GND
TX (Green)
GND (Black)
7) Multi:
tracking control
TTL communication requirements: TTL signal is 3.3V, baud rate:
115200, data bit 8, stop bit 1, no parity, HEX send and receive.
Low Gear
Position 1
Middle Gear
Position 2
High Gear
Position 3
Switch from Position 2 to 1: Cancel tracking
Connection Diagram
(PC - USB to TTL Cable- Gimbal Camera as
example):
Switch from Position 2 to 3: Exit the tracking, display the lock frame in
the center of the screen, start tracking
Switch from Position 3 to 2: "+" appears in the center of the screen,
adjust the cross cursor UDLR with yaw and pitch control to lock target
object
Switch from Position 2 to 3 again: Choose another target for second
tracking
