ViewPlus VP Elite, Руководство пользователя

Страница: 9 / 31

8
III. Printer Setup
A. Unpacking

Remove the embosser and all its accessories from its packaging.

Inspect the ViewPlus embosser and its packaging for any damage.

Save the packing material and box. If any damage occurred during shipping, most shipping
companies require the box and the packing material in order to settle the insurance claim. The
packing material must also be used to ship the ViewPlus embosser for warranty maintenance
service.

Follow the VP Elite and Premier Setup Instructions included with your other materials.
B. Cable Attachment
Power cable
The VP Elite and Premier embossers have a power module with a power socket, on/off switch,
and a compartment holding two fuses on the back side. A sticker next to the power module
indicates what specific fuses are required for the embosser. If the embosser will not power on, it
might be necessary to replace the fuses.
Shows the power module in the back of the embosser
Insert the power cable plug into the VP Elite or Premier power connector and the other end of the
power cable into a grounded outlet or a surge protector (recommended).
Turn the embosser on by pressing the power switch to the On or "I" position. The part of the
switch towards the top of the printer should be pressed down.