ViewPlus VP Elite, Руководство пользователя

Страница: 14 / 31

13
Form Length – This field shows the page length. For standard page sizes, this field is
informational only. If the Form Size is set to Custom, this field is editable.
Top Margin – Set the top margin to be used when printing in legacy mode. NOTE: IF YOU ARE
PRINTING FROM AN APPLICATION THAT SENDS MARGIN INFORMATION WITH
THE PRINT JOB, SET THE TOP MARGIN TO 0.
Left Margin – Set the left margin to be used when printing in legacy mode. NOTE: IF YOU
ARE PRINTING FROM AN APPLICATION THAT SENDS MARGIN INFORMATION
WITH THE PRINT JOB, SET THE LEFT MARGIN TO 0.
Right Margin
– Set the right margin to be used when printing in legacy mode.
NOTE: WHEN
EMBOSSING DOUBLE SIDED, ADJUST THE LEFT AND RIGHT MARGIN SETTINGS
ACCORDING TO THE REQUIREMENTS FOR THE FRONT SIDE OF THE PAGE. IF
THE LEFT AND RIGHT MARGINS ARE SET DIFFERENTLY, THE MARGINS WILL
BE APPLIED AS BINDING MARGINS, MEANING THE LEFT MARGIN SETTING
WILL BE APPLIED TO THE RIGHT MARGIN OF THE BACK SIDE OF THE PAGE
AND THE RIGHT MARGIN WILL BE APPLIED TO THE LEFT MARGIN OF THE
BACK SIDE OF THE PAGE. THE RESULT IS THE SAME AMOUNT OF MARGIN IS
APPLIED TO THE SAME EDGE OF THE PAPER ON BOTH SIDES.
Text/Graphics Mode – Select Text mode if your legacy document contains text. If the document
is a graphic, select Graphics mode to remove the space between Braille lines so that dots may be
printed in an even grid.
Dots Per Character – Select 6 or 8 dots.
Automatic Text Wrapping – Select 'On' if lines in the document are longer than will fit on one
printed line and you do not wish the lines to be truncated. If the document is formatted correctly
for the page size and margins you are using, or if you do not wish to have long lines wrapped to
the next line, select 'Off'.
Extra Line Spacing – Set the amount of extra space desired between Braille lines. This setting
can only be set in multiples of 0.05 inches.
Media Type – Select a default media type from the list, or choose Custom to set the punch forces
manually for non-standard media.
Custom Media Lowest Force – Enter the punch force value to be used for the lowest dots on a
custom media type.
Custom Media Highest Force – Enter the punch force value to be used for the highest dots on a
custom media type.
Paper Source – Select the source for the paper.
Braille Table… –
The VP Elite or Premier can store up to six Braille tables. Click on 'Properties'
to open a dialog which allows you to load the tables to the Elite or Premier internal memory.
Braille Table – Select which Braille table to use when printing.