VIEWEG
7
EN
Operating Manual Cartridge Sleeve
4 Operation
Ensure pressure supply is shut-off and no pressure is captured inside the cartridge
sleeve!
Connect fluid tube to outlet fitting of cartridge sleeve (not shown in pictures)
• Open cartridge sleeve by unscrewing upper and lower part
• Pull O-ring over the external thread of the Euro cartridge down to the bottom
• Cut off outlet to allow material flow later
• Screw Euro cartridge into thread of lower part until O-ring is compressed smoothly
for sealing
• Put upper part on assembled Euro cartridge and close hand tight
Steps of operation:
1
2
