ViewCast Osprey-300, Руководство пользователя, Страница: 88 / 102

92
Osprey-300 User’s Guide
Setup Sequence
SwiftCap has many possible scenarios and
pathways. The following steps illustrate a few of
the most useful possibilities.
1. Click the “Tools” button to open the
capture settings dialog (fi gure 2).
2. First decide whether you want to capture
video only, audio only, or both; unselected
controls will be disabled – the following
assumes you have selected “Both” (2a).
3. Select your video device and source.
Select “No Compression” (2b).
4. In the Video Format group, uncheck
“Use Driver’s Default” (2c).
5. Select the video standard, color
format, frame rate, and video
size you want to use (2d).
6. Select your audio device and source.
Select “No Compression” (2e).
7. In the Audio Format group, check “Use
Default” for this experiment (2f).
8. Click OK (2g).
Next, click the Destination button to open the
Capture Destination dialog (figure 3):
1. In the video section, select “Renderer” (3a).
2. Select “VMR7 Renderer” (3b). Note
that there is a discussion of renderers
in the Video Capture Topics chapter.
3. In the audio section, select “Renderer” (3c).
4. Select your sound card as the
rendering device (3d).
5. Click OK (3e) .
Next, click the Capture or Start button. An
“Active Movie” video window will open on your
screen, and your will hear audio from the capture
source, until you click Stop.
The Capture Setting Dialog 2
The Capture Destination Dialog 3