24
Osprey-300 User’s Guide
After completing the Found New Hardware
Wizard, the applications for the Osprey driver
must also be installed. To do this, navigate to the
directory containing the Windows XP driver for
your Osprey card, and run SETUP.EXE.
For detailed steps, please refer to Option A: Run
the Installation Program (Recommended).
T
ESTING
THE
I
NSTALLATION
1. Verify the hardware installation
is complete, in accordance with
the directions in Chapter 2.
2. Connect a camera, VCR, or
other video signal source to the
Osprey card’s connectors.
3. Open the Osprey Capture
group in the Start menu.
4. Click the SwiftCap icon.
5. Verify the screen displays a still video
frame from the Osprey card. Click the
Preview button. The screen should
display moving video frames.
6. If the video area is a plain blue fi eld, it
could be for one of the following reasons:
• The driver is looking for video on the
wrong input connector. You can either
move the video cable to another
connector, or reconfigure the driver using
its Control Dialog (refer to Chapter 6 -
Osprey-300 Video Control Dialog).
• The video source is not turned on or
activated.
7. If the video area is scrambled or has bad
color, the signal format of your video
source may be different from the signal
format selected in the driver software.
Since the driver defaults to NTSC-M signal
format, users of PAL and SECAM equipment
always need to change the driver’s signal
format the fi rst time they run the driver.
Please see Video Standard in Chapter
6 – Osprey-300 Video Control Dialog.
Содержание Osprey-300
Страница 1: ...Osprey 300 User s Guide...