VIETA VPC47IP, Руководство пользователя

Страница: 36 / 44

E - 36
CALL TRANSFER
TO AUDIO TRANSFER FROM HEAD UNIT BACK TO THE MOBILE PHONE
During the talking mode, user can press the “TRANSFER” button to transfer the audio from
the unit back to the mobile phone for privacy reason. The LCD Display will display “
” on the LCD for 3 seconds.
After the “Transfer” button is pressed, the mute of the present mode will be released at
the same time.
When making an outgoing call, it's not possible to CALL TRANSFER if the call is not
being answered yet.. It's only possible to Transfer the call to Mobile phone after the call
is being answered.
During the talking mode, if the Ignition is being turned off, the unit will keep the
conversation even if the Ignition is Switched off. After finished the conversation, User can
press “CLEAR” button to switch off the unit.
Depending on different type of Mobile Phone, the time need for activating the CALL
TRANSFER mode is different. Like Nokia Mobile Phone usually takes 3-5 seconds after
pressed the "TRANSFER” button for audio transfer back or forth through Unit to mobile
phone.
OUTGOING CALL
Making An Outgoing Call
Press the “PHONE” (AUDIO)button to start making an outgoing call. The LCD Display will
display And a cursor will keep blinking while waiting the user to enter
the phone number.
Rotate the encoder knob to navigate thru the numeric 0-9 *, # & + .
Press the” AUDIO” button as confirm input the selected numeric.
Use the File up/down button to move the cursor back or forward to the wrong input
numeric.
Once the phone number has been entered completely, Long press the“PHONE” button
again or Short Press the “MODE” button to start dialing the call, the LCD Display will
display “ ”.
The audio output of the present mode will ONLY be muted after pressing the “PHONE”
button as a confirmation to dial the outgoing call.
During the talking mode, the LCD Display will display the duration “ ”of
the conversation.
User can use the volume up/down to adjust the volume level.
To end the conversation, press the “Clear” button . The unit will switch back to the
previous mode automatically. The mute of the previous mode will be released at the same
time.
Tips
Under the Calling mode, if need to input any number, for example Pin Code Input or
Service Number Dial Input. Short press the
“AUDIO” button to enter the numeric input
interface then rotate the encoder knob to navigate the desire input number and press
the
“AUDIO” button again as confirm input the selected number. To exit the numeric
input interface by LONG PRESS the “AUDIO” button again.