VIETA VH-MS150BK, Руководство пользователя

Страница: 30 / 46

DVD MICROSYTEM
30
Symptom Cause Solution
No sound Cables not properly connected. Connect cables securely.
Disc warped or dirty. Clean your disc.
Player in mute statues. Press MUTE button again.
No picture Cables not properly connected. Connect cables properly.
Correct input not selected on TV. Reset the AV/TV status of your
TV set.
No color TV system not right. Press PAL/NTSC button.
TV set color not properly adjusted. Adjust color of the TV set.
Not reading disc No disc in the player. Load a disc.
Disc not properly loaded. Reload a disc, with the label
side facing up.
Condensation on the laser head. Turn on the player, unload the
disc and leave it on for about
an hour.
Remote control failure Remote control not pointing to the Point the repote at the unit.
sensor window.
Remote control’s operating distance Use the remote control within
is more than 8 meters away from the 8 meters of the unit.
TV.
Batteries low. Replace the batteries.
Temporary function failure Poor quality disc used Wait 5-10 secs and the player
Wrong buttons pressed. wil return to normanl operation
once more.
External electrical interference Wait 1-3 seconds and press
correct button.
Turn off the player 1-2 mins then
switch back on. If problem
persists relocate the player or
eliminate source of interference.
Rolling Picture TV set not properly adjusted Readjust TV system
Incorrect output format on Select correct output format
DVD unit for your TV (PAL/NTSC)
Troubleshooting
According to waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be
separately collected and treated. If at any time in the futrue you need to dispose of this product
please DO NOT dispose of this product with household waste. Please send this product to WEEE
collecting points where available.