VIETA VC-HU710BT, Руководство пользователя

Страница: 16 / 38

USB/SD Radio
16
INSTALLATION
The following illustration
shows a typical installation.
If you have any
questions or require
information regarding
installation kits, consult
your
customer car audio dealer
or a company suppling kits.
If you are not sure how to
install this unit correctly,
have it installed by a
qualified technician.
Remove the unit
1. Press the Panel Release button.
2. Push the left side of the panel rightward
3. Pull the panel towards you to disengage it from the
chassis.
1
2
To attach the front panel back to the unit chassis,
please insert the right side of the panel in the chassis
until it is correctly engaged. Press the left side of the
panel until the mechanism locks it into place.
Bend the appropriate
tabs to hold the sleeve
firmly in place.
CONNECTING THE SYSTEM
ISO CONNECTOR WIRING CHART
Wiring Diagram
PIN WIRE COLOR FUNCTION/LABEL
A4 YELLOW B)
A5 BLUE CONNECT TO SYSTEM
CONTROL TERMINAL OF
THE POWER AMP OR
AUTO ANTENNA RELAY
CONTROL TERMINAL
(max 150mA 12VDC)
A7 RED IGNITION(ACC)
A8 BLACK GROUND
B1 VIOLET RIGHT REAR SPEAKER (+)
B2 VIOLET/BLACK RIGHT REAR SPEAKER (-)
B3 GREY RIGHT FRONT SPEAKER (+)
B4 GREY/BLACK RIGHT FRONT SPEAKER (-)
B5 WHITE LEFT FRONT SPEAKER (+)
B6 WHITE/BLACK LEFT FRONT SPEAKER (-)
B7 GREEN LEFT REAR SPEAKER (+)
B8 GREEN/BLACK LEFT REAR SPEAKER (-)
4
182m
m
53mm 1
2
3
Screw
Dashboard
Sleeve
Tr im
Plate
Control
Panel