VIETA VC-HC800BT, Руководство пользователя

Страница: 19 / 32

19
Receiving a Call
1. If there is an incoming call, the Caller ID is
displayed. If the incoming.call has no Caller ID,
[PHONE IN] is displayed.
2. Press to answer / accept the call.
3. When conversation ends, press to terminate
the call.
Call Transfer
You can transfer audio from the car speakers to the
phone during a call.
While talking, press and hold voice transfers from
loudspeaker to mobile phone.
Bluetooth A2DP Audio Streaming
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP), you can
listen to the music stored on the device through the
unit. If the device also supports Audio Video Remote
Control Profile (AVRCP) profile, you can use the
control on the unit or its playback function (eg iPOD
Music) to play music stored on the device.
1. Press MODE button repeatedly to select [BT
AUDIO].
2. Press to start play, press it again to pause.
3. To track up/down, turn the track up/down on front
panel.
TROUBLE SHOOTING
Before going through the check list, check wiring
connection. If any of the problems persist after check
list has been made, consult your nearest service
dealer.
No power or no sound
Car engine is not on. Turn the car engine on.
Cable is not correctly connected. Check connections.
Fuse is burnt. Replace fuse.
Volume is in minimum. Adjust volume to a desired
level.
If the above solutions cannot help, press the RESET
button.
Ensure that the track played is of a compatible
format.
Noise in broadcasts
Signals are too weak. Select other stations with
stronger signals.
Check the connection of the car antenna.
Change broadcast from Stereo to mono.
Cannot play disc
Ensure tha the disc label is inserted with the printed
side facing up.
Wipe the disc with fibre cleaning cloth from the centre
to the edge in a straight line.
Asegúrese de que se ha introducido el disco con la
cada impresa hacia arriba.
This disc may be defective. Play another disc.
Ensure that the CD is a finalised CD/CD-R/CD-RW.
Ensure that the CD is not encoded with copyright
protection technologies.
The CD Skips tracks
Ensure that the CD is not damaged or dirty.
Ensure that random mode is deactivated.
Preset stations lost
Battery cable is not correctly connected. Connect
the battery cable to the terminal that is always live.
Display show ERR-1
The disc, USB or SD device cannot be red in two
minutes.
Display show ERR-3
USB/SD data error.
Disc is upside down. Ensure the printed side is facing
up.
Display show ERR-5
Communication error or component is damged.