Viessmann VITOWELL EASY C1, Руководство по эксплуатации

Страница: 7 / 16

Electrical Loading Table
Test Run
Turn on the water supply and Stop Valve, the water will flow through the
Handshower.
Switch on the electrical supply.
Turn the Temperature Control Knob to ‘ON’, the Red Indicator light (Power)
will turn on, hot water will flow out within a few seconds. The more Temperature
Control Knob being turned in clockwise direction, the hotter the shower is.
The shower might not be hot enought even at ‘MAX’ position if incoming water
supply from the mains is too cold or pressure water is too high. In this case, you
may adjust the Stop Valve to reduce the water inflow in order to get the desired
showering temperature.
Switch OFF the electricity supply after shower.
( Malaysia M odal)
Voltage
(AC)
Power
(kW)
Current
(A)
Minimum Conductor Size (csa)
mm² Conduit Cable Flexible Cable
On/Off
Switch (A)
Fuse /
MCB (A)
240~
50/60Hz
230~
50/60Hz
220~
50/60Hz