Vitosol 100-F Technical Data
5354 729 - 01
Standard Equipment/Accessories
Technical information subject to change without notice.
Printed on environmentally friendly (recycled and recyclable) paper.
Standard equipment
Vitosol 100-F, Models SH1B and SV1B come fully
assembled in shrink-wrap packaging and ready to be
connected.
Accessories
Accessories (individually packed, depending on order):
- Mounting hardware with technical literature
- Interconnection pipes with insulation
- General connection set
- Sensor well set
- Solar Divicon (pumping station for the collector circuit)
- Electronic differential temperature control
- Automatic air vent with air separator
- Fast air vent valve with tee and shutoff valve
- System filling manifold
- Solar hand pump
- Solar expansion tank
- Heat transfer medium
Mounting hardware
The mounting hardware consists of components required
for the relevant method of installation, such as:
Roof brackets, mounting plates, mounting rails,
connecting elements for mounting rails, clamping bolts,
screws and nuts.
General connection set
Required to connect solar collector to system piping.
One set required per collector array - max. 269 ft
2
(25 m
2
).
Pipe connection set
Required to connect multiple solar collectors.
Sloped roof hardware
Required for mounting collector directly onto shingled
roof. Raises collector 3½”
(889 mm) above the roof.
Flat roof hardware
Required for freestanding, flat roof installations.
Solar Divicon
Preassembled pumping station for solar collector circuit.
Includes: 3-speed pump (2 sizes), pressure gauge,
2 thermometers, 2 ball valves, pressure relief valve,
flow meter, 2 flow check valves, air separator, system
fill manifold, and foam insulation cover.
Note:
Viessmann offers complete solar heating system
combi packages, as well as comprehensive design
support in order to facilitate the component
selection process.
SCU 124/224/345
Electronic differential temperature control for solar heating.
Roof bracket
Installation rail
x2
Heat transfer medium
Tyfocor non-toxic heating liquid for solar heating systems
with active anti-corrosion and anti-ageing protection.
Frost protection:...................... to -31ºF (-35ºC)
Specific gravity at 68ºF (20ºC):... 1.032 to 1.035 g/cm
3
to ASTM D 1122
Viscosity at 68ºF (20ºC):.......... 6.5 to 8.0 mm
2
/s to DIN
51562
pH value:................................ 7.5 to 8.5 to ASTM
D 1287
Color:..................................... transparent, blue-green
Container:............................... 5.3 USG (20 L) in a
disposable container
