Viessmann VITODENS, Руководство по эксплуатации, Страница: 26 / 56

26
■ The time program for DHW heating is
made up of time phases. One time
phase from 5:30 to 22:00 h
for every
day of the week is set at the factory.
■ Automatic mode is set at the factory
for DHW heating. This means that, in
standard heating mode, the DHW is
reheated to the set temperature. To
ensure that hot water is available at
the start of standard heating mode, the
time phase for DHW heating begins
automatically half an hour earlier than
the time phase for standard heating
mode.
■ If you don't want the automatic mode,
you can select up to 4 individual time
phases per day for DHW heating,
which can be the same for every day
of the week or different. Set the start
and end points for each time phase.
■ When setting, bear in mind that your
heating system requires some time to
heat the DHW to the required temper-
ature.
■ In the "Extended menu", you can scan
the current time program under "Infor-
mation" (see chapter "Scanning infor-
mation", "DHW" group).
Extended menu:
1.
2.
"DHW"
3. "DHW time prog"
4. "Individual"
5. Select part of the week or a day.
6. Select the time phase
!
,
?
,
§
or
$
.
7. Set the start and end points for the
relevant time phase.
Example shown:
■ Time program for Monday to Friday
( "Mo-Fr" )
■ Time phase !
:
From 04:30 to 06:30 h
■ Time phase ? :
From 15:30 to 20:30 h
DHW
Select with
(
HC1
Mo-Fr
?
15:30 - 20:30
u
0 2 4 6 8 10 12 14 16 18 20 22 24
!
04:30 - 06:30
u
ON
ON
! ?
Example:
You want to set the same time program
for every day except Monday:
Select the period
"Monday–Sunday"
and set the time program.
Then select
"Monday" and set the time
program for this.
DHW heating
Setting the time program for DHW heating
5592 682 GB